Complete range of high performance stretch wrapping machine for palletized loads. Pallet handling systems and accessories to complete packaging of palletized loads.
Sturdy structures
The reliability of our machines is constant over time. All structures are made of sturdy tubular steel with high strength and sized to ensure a long life of the plant. Technowrapp guarantee the operation of its systems in harsh environments, with loads of work 3 shifts, 365 days a year. Motors, pneumatics, electrical and electronic components, security systems, are chosen from the leading brands in the market. The maintenance required is minimal, ask a simulation of the expected annual cost on your Technowrapp plant and compare it with competitors.
FILM STRETCHED MORE THAN 400%
Smooth dispensing of the film
and a high degree of pre-stretch
Only 96 grams of filmA pallet measuring 800x1200mm, height 1.500 mm,
using 10 layers of film and a standard film reel with wide 23µm:
only 96 grams of film are used with a great saving of material.
Tacho generator on all wrapping machines
Buying a new Technowrapp stretch wrapping machine is economical even if your wrapping machine is new!
Technowrapp was set up with the goal to exceed industry standards and the simple chart on this page is the proof. With the
EP-F2-ECO and
EP-V1-ECO electronic pre-stretch carriages, which can stretch the film up to 400%, the savings you get compared to the traditional stretch is evident and can been seen on the graph below. It takes 10 pallets per hour with a Technowrapp stretch wrapping machine to save 5,000 € a year, it takes 10 pallets per hour with Technowrapp stretch wrapping machine to save 3.500Kg. of film and reduce the impact on the environment.
Conditions considered.Cost of film 1,5 € per kg - 12 layers of film per pallet - pallet measuring 800x1200mm - 8 hours for 300 days a year. Weight of one cycle of film with the current wrapping machine: 20, 22, 24 grams.
Film tension adjustable from panel
Example of parameterization disbursement of the film with rotating ring machine.
On all Technowrapp wrapping machines, the tension of the film to the load can be set accurately directly from the electrical panel.
Sealing temperature control
Cutting and sealing mechanism
The edge of the film is sealed on a broad surface and the
temperature is controlled to guarantee a perfect seal.
A sensor on the device controls the feedback resistance in reaching
the exact temperature set on the display.
The initial flap of the film is blown inside the wrapping spire.
Wrapping in safety
The cutting and sealing mechanism is positioned away from the conveyor during the wrapping process. This mechanism is the most delicate of the wrapping machine and it is therefore protected from being damaged, in case the load falls over during the wrapping procedure. The cleaning of the cutting mechanism is automatic.
Load top sheet cut system
The polyethylene sheet is cut with a full-width toothed blade. The device holds the sheet on and under the blade and cuts it in the middle with a short run movement. This simple solution guarantees a perfect cut in any working condition for more than 1.000.000 pallets.
Wrapping machines always in efficiency
Automatic notification of routine maintenance on the display.
The PLC counts the hours of work and suggests all the routine maintenance to the operator.
The user interface is clear and interactive, the basis of the system is driven by images that make easy each operation. All automatic Technowrapp plant use the touch-screen that combines graphics and buttons in a handy position.
Central lubricator for the rolling tracks of the gear
Lubrication point in rotating arm machine. The lubricator for the rolling tracks of the gear is conveniently located for easy maintance.
Lubrication point in rotating platform machine. Even in this case the lubricator for the rolling tracks of the gear is easily accessed.
Simplified installation: components are
connected to the control panel with plugs
To reduce time during installation and to avoid wiring errors.
All connections to the electrical components of the equipment are secured by connectors. Before being shipped, the plant is fully tested and perfectly adjusted; at customer’s factory all we have to do is place the equipment, connect the connectors and power up.
Fast replacement of the film reel:
positioning is at a height 50 cm
The replacement operation is simple and in a convenient location.
The operator raises the film reel to the height of the knees and
place it on the carriage. The reel is held by two cones that
fit within the soul of cardboard.
|